Rugao Lian Tuo Electronics Co.,Ltd
+8613862730866
Categories
Latest Products
Contact Us
Axial Rectifier Diode Package Series

Axial Rectifier Diode Package Series

Axial package selection for rectifier diodes where current rating, body size, lead pitch and repair fit need to line up.

Send Inquiry
  • Description

    Axial Rectifier Diode Package Series for Leaded Boards

    Compare R-1, A405, DO-41, DO-15, DO-201AD and R-6 packages for through-hole rectifier sourcing.

    • R-1 to R-6 bodies
    • 1A-10A package range
    • Through-hole assembly
    • Replacement fit review

    Product Detail

    • Product: axial rectifier diode package.
    • Packages: R-1, DO-41, R-6.
    • Current: 1A-10A.
    • Use case: leaded boards.

    Product Description

    This axial rectifier diode package page is for buyers who need leaded rectifier bodies that fit existing boards, service stock or through-hole assembly. You can compare R-1, A405, DO-41, DO-15, DO-201AE, DO-201AD and R-6 packages by current class, voltage range, body length, lead diameter, lead pitch, packing and application. Axial packages are still widely used in adapters, chargers, appliance boards and industrial repair work. Lian Tuo helps you match electrical rating with the physical package before sampling. That keeps package selection tied to the real board holes.

    Our Axial Rectifier Diode Package Options

    R-1 Axial Rectifier Diode PackageSmall leaded body for compact low-current rectifier and blocking paths.
    A405 DO-41 Axial Rectifier Package1A class body for 1N4007, FR107, HER108 and UF4007 directions.
    DO-15 Axial Rectifier Diode PackageMedium body option for 1.5A to 2A rectifier series.
    DO-201AD Axial Rectifier PackageLarger 3A class body for 1N5408, FR307 and HER308 families.
    R-6 Axial Rectifier Diode PackageHigh-current leaded package for 6A to 10A power rectifier paths.

    Feature Box

    • Package RangeR-1, DO-41, DO-15, DO-201AD and R-6 are covered.
    • Current MatchingBody size follows 1A to 10A current classes.
    • Board FitLead pitch and body length can match old layouts.
    • Repair FriendlyAxial packages support service and through-hole stock.

    Start With The Body

    An axial rectifier diode package should be confirmed before equivalent approval because body length and lead diameter decide whether the part fits. A correct voltage rating does not help if the diode cannot sit in the board holes or service fixture. It also helps avoid a part that fits electrically but not physically.

    Match Package To Current

    R-1, DO-41, DO-15, DO-201AD and R-6 bodies carry different current and heat expectations. An axial rectifier diode package should be selected by current duty, surge rating and board temperature, not only by a familiar part number. That keeps package selection tied to the real board holes. It also helps avoid a part that fits electrically but not physically.

    Check Lead Form And Packing

    Leaded production may need bulk, ammo, taped, cut or formed leads. An axial rectifier diode package request should include lead pitch and packing so the part arrives ready for assembly. This saves time on high-volume or repair orders. It also helps avoid a part that fits electrically but not physically.

    Simplify Replacement Sourcing

    Repair buyers often send old photos where only the body size is clear. Lian Tuo can compare axial rectifier diode package options by body, lead spacing, voltage and current so the replacement can be tested without board modification. That keeps package selection tied to the real board holes. It also helps avoid a part that fits electrically but not physically.

    Vertical Product Applications

    Through-Hole Power Boards

    Use an axial rectifier diode package on through-hole power boards when the design needs familiar leaded assembly and practical service access. The package should match current rating, board holes and required lead form. It also helps avoid a part that fits electrically but not physically. That keeps package selection tied to the real board holes.

    Appliance Repair Stock

    Appliance repair stock often needs rectifier packages that match older board layouts. An axial rectifier diode package can be selected by body length, lead pitch and old marking before equivalents are approved. That keeps package selection tied to the real board holes. It also helps avoid a part that fits electrically but not physically.

    Charger And Adapter Production

    Chargers and adapters still use axial packages when cost, reliability and insertion process fit the production line. An axial rectifier diode package should match surge current, voltage and packing requirement. It also helps avoid a part that fits electrically but not physically. That keeps package selection tied to the real board holes.

    FAQ

    How do I choose an axial rectifier diode package?

    Start with current, voltage, board pitch, body length, lead diameter, surge condition and packing method. The package should fit both the electrical rating and the board mechanics. It also helps avoid a part that fits electrically but not physically. That keeps package selection tied to the real board holes.

    What is the difference between DO-41 and DO-201AD?

    DO-41 is commonly used for 1A class parts, while DO-201AD is larger and often used for 3A class rectifiers. Body size, lead diameter and current margin differ. That keeps package selection tied to the real board holes. It also helps avoid a part that fits electrically but not physically.

    When should I choose R-6 package?

    Choose R-6 when the circuit needs higher current, such as 6A to 10A rectifier paths, and the board can accept the larger body and lead form. It also helps avoid a part that fits electrically but not physically. That keeps package selection tied to the real board holes.

    What data helps quote axial packages?

    Send current, voltage, package name, lead pitch, body size, old marking, packing requirement and quantity. A photo with dimensions helps confirm the package. That keeps package selection tied to the real board holes. It also helps avoid a part that fits electrically but not physically.

    Can axial packages be replaced with SMD?

    Only if the PCB footprint and thermal path are redesigned or already support SMD. Axial and SMD packages are different assembly routes and cannot be swapped blindly. It also helps avoid a part that fits electrically but not physically. That keeps package selection tied to the real board holes.

    Does packing type matter?

    Yes. Bulk, tape, ammo or formed leads affect production handling. Include packing needs in the RFQ so the axial rectifier diode package fits your assembly line. That keeps package selection tied to the real board holes. It also helps avoid a part that fits electrically but not physically.

    Can Lian Tuo support axial package equivalents?

    Yes. We can compare R-1, A405, DO-41, DO-15, DO-201AD and R-6 axial rectifier diode package options by body, rating and lead form. It also helps avoid a part that fits electrically but not physically. That keeps package selection tied to the real board holes.

    Previous: No Information
    Next: No Information

(0/10)

clearall