Product Detail
- Product: PFC high voltage diode.
- Voltage: 600V-1200V.
- Focus: boost stages.
- Use case: DC bus rails.
Product Description
This PFC high voltage diode page is for boost power factor correction circuits where the diode works between the inductor, switch and DC bus capacitor. You can compare 600V to 1200V ultrafast, SiC and power-package diodes by reverse voltage, current, reverse recovery, forward loss, package, heat-sink contact and switching frequency. PFC positions are sensitive because the diode can shape efficiency, EMI and switch stress. Lian Tuo helps you review the PFC topology before recommending samples for the exact boost path. That keeps the PFC diode choice tied to the boost waveform.
Our PFC High Voltage Diode Options
| 600V PFC High Voltage Diode | Option for lower bus stress and compact PFC input stages. |
| 1200V PFC High Voltage Diode | Higher-margin choice for wide-input or harsher high-bus applications. |
| Ultrafast PFC High Voltage Diode | Fast-recovery route for reducing switching loss and recovery noise. |
| SiC PFC High Voltage Diode | High-performance direction when recovery loss must be kept very low. |
| Power Package PFC Diode | TO-220, TO-247 or module path for heat-managed boost stages. |
Feature Box
- Boost Path FitSelection follows inductor, switch and bus stress.
- Recovery ReviewReverse recovery is checked against switching frequency.
- Thermal MarginForward loss and heat path are reviewed together.
- Package ChoiceUltrafast, SiC and power packages can be compared.
Start With The Boost Node
A PFC high voltage diode should be selected around the real boost node, not only the DC bus voltage. The inductor current, switch timing and bus capacitor stress all affect diode behavior. Share the PFC topology so the sample matches the electrical job. It also helps avoid selecting by voltage alone.
Control Recovery Loss
Reverse recovery can raise heat and EMI in a PFC stage. A PFC high voltage diode should be reviewed by recovery time, softness, switching frequency and current slope. Ultrafast or SiC options may be useful when recovery loss becomes part of the efficiency problem. That keeps the PFC diode choice tied to the boost waveform.
Match Package To Heat
Boost PFC diodes can run hot because current and switching stress happen together. A PFC high voltage diode package should follow average current, peak current and the available heat-sink path. TO-220, TO-247 or module choices should be justified by real thermal needs. It also helps avoid selecting by voltage alone.
Avoid Generic HV Substitutes
A general high-voltage rectifier may match voltage but still fail the PFC waveform. Lian Tuo can compare PFC high voltage diode options by recovery, voltage, current and package so replacements do not create efficiency or EMI surprises. That keeps the PFC diode choice tied to the boost waveform. It also helps avoid selecting by voltage alone.
Vertical Product Applications
AC/DC Front Ends
Use a PFC high voltage diode in AC/DC front ends when the boost stage needs reliable current transfer into the DC bus. Voltage rating, reverse recovery and package temperature should be reviewed before approval. It also helps avoid selecting by voltage alone. That keeps the PFC diode choice tied to the boost waveform.
Industrial Power Supplies
Industrial power supplies often need PFC stages that operate near warm components and variable line conditions. A PFC high voltage diode should match bus voltage, switching stress and cooling method for long service life. That keeps the PFC diode choice tied to the boost waveform. It also helps avoid selecting by voltage alone.
High-Efficiency Converters
High-efficiency converters may need ultrafast or SiC PFC diode directions to reduce recovery-related loss. The final choice should be based on waveform, current and thermal measurements, not only efficiency claims. It also helps avoid selecting by voltage alone. That keeps the PFC diode choice tied to the boost waveform. It also helps avoid selecting by voltage alone.
FAQ
How do I choose a PFC high voltage diode?
Start with bus voltage, boost current, switching frequency, recovery requirement, forward loss, package and heat path. PFC positions need voltage and recovery behavior reviewed together. It also helps avoid selecting by voltage alone. That keeps the PFC diode choice tied to the boost waveform.
When should I consider SiC for PFC?
Consider SiC when reverse recovery loss, heat or EMI makes silicon diodes difficult to use. The benefit should be checked against cost, package availability and the actual PFC switching waveform. That keeps the PFC diode choice tied to the boost waveform.
Can UF or MUR diodes be used in PFC?
Sometimes, if voltage, current, recovery time and package temperature fit the design. Higher-power or higher-frequency PFC stages may need stronger ultrafast, SiC or module directions. It also helps avoid selecting by voltage alone. That keeps the PFC diode choice tied to the boost waveform.
What data helps quote PFC diodes?
Send bus voltage, input range, boost current, switching frequency, package, heat-sink condition, old marking and quantity. A schematic snippet helps confirm the diode position. That keeps the PFC diode choice tied to the boost waveform. It also helps avoid selecting by voltage alone.
Why does recovery matter in PFC circuits?
Recovery current can increase switching loss, heat and noise at the boost switch. A suitable PFC high voltage diode reduces that stress when matched to the actual frequency and current slope. It also helps avoid selecting by voltage alone. That keeps the PFC diode choice tied to the boost waveform.
Should PFC diodes use TO-220 or TO-247?
That depends on current, loss and cooling. TO-247 offers more thermal room, while TO-220 can fit smaller stages. Mechanical space and heat-sink contact should be checked. That keeps the PFC diode choice tied to the boost waveform. It also helps avoid selecting by voltage alone.
Can Lian Tuo support PFC diode equivalents?
Yes. We can compare 600V to 1200V ultrafast, SiC and power-package PFC high voltage diode options by waveform, current, package and thermal requirement. It also helps avoid selecting by voltage alone. That keeps the PFC diode choice tied to the boost waveform.
Internal Product Links
Ultrafast High Voltage Diode PFC Circuit Diode TO-247 Power Diode Module






