Product Detail
- Product: UF4007 ultra fast rectifier diode.
- Rating: 1A, 1000V.
- Package: DO-41 / A-405.
- Use case: switching paths.
Product Description
This UF4007 ultra fast rectifier diode page is for compact high-voltage switching paths where a standard 1N4007-style diode would recover too slowly. You can compare UF4007 by 1A current, 1000V reverse voltage, recovery time, forward drop, leakage, DO-41 or A-405 package fit, lead form and operating temperature. It suits SMPS auxiliary outputs, snubber paths, clamp circuits, LED drivers and converter boards. Lian Tuo helps you confirm that ultrafast recovery is truly needed before approving replacements. That keeps UF4007 tied to ultrafast 1A switching paths. It also helps avoid replacing it with a slow standard diode.
Our UF4007 Ultra Fast Rectifier Diode Options
| UF4007 Ultra Fast Rectifier Diode | 1A 1000V DO-41 option for compact recovery-sensitive paths. |
| UF4006 Ultra Fast Rectifier Diode | 600V direction when lower reverse-voltage margin is enough. |
| DO-41 UF Rectifier Diode | Axial package route for through-hole high-speed rectifier boards. |
| A-405 UF4007 Equivalent | Package comparison path when old A-405 body style is required. |
| 1A 1000V Ultrafast Equivalent | Replacement direction when voltage, recovery and body fit must match. |
Feature Box
- Ultrafast RecoveryFast turn-off supports compact switching circuits.
- 1000V RatingReverse-voltage class suits high-voltage auxiliary paths.
- 1A PackageDO-41 and A-405 bodies fit through-hole boards.
- Replacement FitUF4007 and 1N4007 positions can be reviewed.
Do Not Treat It As 1N4007
A UF4007 ultra fast rectifier diode may share a 1A, 1000V class with familiar standard rectifiers, but its purpose is different. It is chosen for recovery speed. Use it where switching behavior matters, and avoid replacing it with a slow diode by rating alone. It also helps avoid replacing it with a slow standard diode.
Use It In Compact HV Nodes
UF4007 fits compact high-voltage paths that need a small axial package and ultrafast recovery. A UF4007 ultra fast rectifier diode should be reviewed by peak voltage, switching frequency and package temperature before the design is released. That keeps UF4007 tied to ultrafast 1A switching paths. It also helps avoid replacing it with a slow standard diode.
Check Heat Under Frequency
Even a 1A diode can heat when recovery loss and current pulses repeat at high frequency. A UF4007 ultra fast rectifier diode should be checked in the actual waveform so the selected part supports both electrical speed and thermal stability. It also helps avoid replacing it with a slow standard diode.
Confirm Package Style
Some boards call out DO-41, A-405 or formed leads for UF4007 positions. Lian Tuo can compare UF4007 ultra fast rectifier diode package requirements, lead form and equivalent markings before sending samples. That keeps UF4007 tied to ultrafast 1A switching paths. It also helps avoid replacing it with a slow standard diode.
Vertical Product Applications
SMPS Auxiliary Outputs
Use a UF4007 ultra fast rectifier diode in SMPS auxiliary outputs when recovery speed affects heat or waveform quality. The device should match output current, peak reverse voltage and package temperature. It also helps avoid replacing it with a slow standard diode. That keeps UF4007 tied to ultrafast 1A switching paths.
Snubber And Clamp Circuits
Snubber and clamp circuits often need a diode that turns off quickly after absorbing pulse energy. A UF4007 ultra fast rectifier diode can fit when current and surge stress remain within range. That keeps UF4007 tied to ultrafast 1A switching paths. It also helps avoid replacing it with a slow standard diode.
LED Driver Converters
LED driver converters may use UF4007 where compact 1000V ultrafast rectification is needed. The part should be selected by switching frequency, board heat and leaded package fit. It also helps avoid replacing it with a slow standard diode. That keeps UF4007 tied to ultrafast 1A switching paths. It also helps avoid replacing it with a slow standard diode.
FAQ
What is UF4007 ultra fast rectifier diode used for?
It is used in 1A, 1000V class switching, clamp, snubber and auxiliary rectifier paths where standard rectifier recovery is too slow for the waveform. It also helps avoid replacing it with a slow standard diode. That keeps UF4007 tied to ultrafast 1A switching paths.
Can UF4007 replace 1N4007?
Sometimes, if package and ratings match. UF4007 is faster, but the circuit should need ultrafast recovery. Replacing UF4007 with 1N4007 in a switching path can create heat or noise. That keeps UF4007 tied to ultrafast 1A switching paths. It also helps avoid replacing it with a slow standard diode.
What data helps quote UF4007?
Send voltage, current, recovery requirement, package, lead form, old marking and quantity. A board photo helps confirm DO-41, A-405 or formed-lead needs. It also helps avoid replacing it with a slow standard diode. That keeps UF4007 tied to ultrafast 1A switching paths.
Is UF4007 suitable for high-frequency SMPS?
It can be suitable for selected 1A auxiliary or clamp paths. Higher current, lower loss or very fast switching positions may need another ultrafast or Schottky direction. That keeps UF4007 tied to ultrafast 1A switching paths. It also helps avoid replacing it with a slow standard diode.
How is UF4007 different from HER108?
Both are faster than standard rectifiers, but recovery and electrical behavior differ by family. Compare recovery time, current, package and waveform requirement before substitution. It also helps avoid replacing it with a slow standard diode. That keeps UF4007 tied to ultrafast 1A switching paths.
Does UF4007 need a larger package?
Not usually for 1A class positions, but package temperature should still be checked. DO-41 or A-405 body fit and lead form matter for replacement orders. That keeps UF4007 tied to ultrafast 1A switching paths. It also helps avoid replacing it with a slow standard diode.
Can Lian Tuo support UF4007 equivalents?
Yes. We can compare UF4007, UF4006, HER108 and 1A ultrafast rectifier diode equivalents by voltage, recovery, package and application. It also helps avoid replacing it with a slow standard diode. That keeps UF4007 tied to ultrafast 1A switching paths. It also helps avoid replacing it with a slow standard diode.
Internal Product Links
1N4007 Rectifier Diode HER108 Ultra Fast Recovery Rectifier Diode










