Product Detail
- Current class: 0.8A-2A.
- ABS path: SMD reflow.
- WOB path: round leads.
- Voltage bins: 200V-1000V.
Product Description
This ABS WOB bridge rectifier page is written for buyers who handle both new compact charger boards and older round bridge replacements. ABS packages support low-profile SMT assembly, while WOB parts help when a service board still uses a round four-lead bridge. You can compare ABS2, ABS6, ABS10, W02, W06 and W10 by current, voltage, body shape, lead style and packing. Lian Tuo helps you separate SMT needs from legacy repair needs, so the quotation does not mix two package routes into one unclear choice.
Our ABS WOB Bridge Rectifier Options
| ABS2 Bridge Rectifier | Small SMD bridge for compact low-current AC input boards. Best fit for compact charger boards when board space is tight. |
| ABS6 Bridge Rectifier | SMD bridge option for common 600V compact designs. Fits small appliance modules where heat margin needs an early check. |
| ABS10 Bridge Rectifier | 1000V ABS package for chargers and smart modules. Useful in legacy WOB replacements if replacement approval must stay simple. |
| W02 Bridge Rectifier | Round leaded bridge for older low-voltage board layouts. Choose it for compact charger boards when assembly routing cannot change late. |
| W10 Bridge Rectifier | Round 1000V bridge for legacy replacement requirements. Helps small appliance modules when repeat purchasing needs clearer stock choices. |
Feature Box
- Two Package PathsABS and WOB choices serve different board styles.
- Compact Rating0.8A-2A options fit light AC input stages.
- SMT Or LeadedYou can quote reflow or round-lead requirements separately.
- Repair FriendlyOld WOB markings can be matched before replacement.
Separate ABS And WOB
An ABS WOB bridge rectifier request should identify whether the board needs an SMD ABS package or a round WOB package. They serve different assembly routes. Clear package selection prevents wrong samples, especially when a new charger design and an older repair order arrive under similar voltage ratings. It also helps purchasing avoid weak equivalent choices.
Protect Pad Geometry
ABS bridge rectifiers depend on pad symmetry and a stable solder profile. If the pad size or stencil opening is not checked, the bridge may tilt or form weak joints. You can share the PCB footprint before sampling so the ABS option fits the real assembly process. That keeps the RFQ tied to the real board condition.
Match Legacy Leads
WOB bridge rectifiers are often ordered for older appliances or low-current boards that still use round leaded parts. Lead forming and body diameter matter here. Matching the old bridge by photo, marking and lead spacing keeps the replacement order from becoming a mechanical problem. This makes repeat orders easier to check internally.
Keep Quotes Clear
ABS and WOB parts may share voltage classes, but they should not be quoted as interchangeable without checking the board. A clear RFQ should state SMT or through-hole, package marking, current class and quantity. That gives you cleaner samples and fewer approval emails. It also protects the layout from late package changes.
Vertical Product Applications
Compact Charger Boards
Use an ABS WOB bridge rectifier direction for compact charger boards when low height and light current matter. ABS parts support automated placement, while WOB parts help repair older charger layouts. You can keep each package route separate before confirming samples. This makes repeat orders easier to check internally. It also protects the layout from late package changes.
Small Appliance Modules
Small appliance modules often use simple low-current AC input stages. An ABS WOB bridge rectifier range gives you SMT choices for new boards and round-lead options for service boards. Confirm package, current and enclosure heat so the part fits the real product. It also protects the layout from late package changes.
Legacy WOB Replacements
Legacy WOB replacements need a bridge that matches the old body and lead pattern, not only the voltage number. This ABS WOB bridge rectifier page helps you compare W02, W06 and W10 style parts before purchasing repair stock for older boards. This gives your sample review more evidence before approval.
FAQ
Are ABS and WOB bridge rectifiers interchangeable?
Usually no. ABS is an SMD package, while WOB is a round leaded package. The voltage rating may look similar, but the footprint and assembly process are different. Confirm the package before treating one as a replacement. That keeps the RFQ tied to the real board condition.
When should I choose ABS bridge rectifiers?
Choose ABS bridge rectifiers for compact boards that need SMT assembly and low package height. They are common in chargers, smart modules and small AC/DC boards where tape-and-reel supply and reflow soldering are important. This makes repeat orders easier to check internally.
When does WOB package still make sense?
WOB makes sense when the board already has a round through-hole bridge footprint or the repair stock must match older equipment. Check body diameter, lead spacing and current rating before approving a WOB replacement. It also protects the layout from late package changes.
What data helps quote ABS WOB bridge rectifiers?
Send the target package, current, voltage, old marking, board photo and quantity. If the order is for SMT production, include packing requirements. If it is for repair, include lead spacing and package photos. This gives your sample review more evidence before approval.
Can ABS10 replace ABS6?
It may work if the voltage, current and footprint match the design, but you should still check thermal behavior and solder pad layout. A higher rating does not remove the need for package and reflow confirmation. It also helps purchasing avoid weak equivalent choices.
Can Lian Tuo separate ABS and WOB quotes?
Yes. We can quote ABS SMD parts and WOB leaded replacements as separate package paths. That helps your team avoid mixed samples and approve the right bridge rectifier for each board. That keeps the RFQ tied to the real board condition.
